Sony MCC3000MT, Service Manual

Page: 58 / 194

2-15. TR-150 Board
Preparation
1. Remove the top cover. (Refer to “2-2. Top Cover” . )
2. Remove the rear panel assembly. (Refer to “2-14. Rear Panel Assembly” . )
Procedure
1. Remove the two connector screws to detach the TR-150 board.
2. Remove the screw to detach the heat sink (TR) and radiation sheet (TR) from the TR-150 board.
TR-150 board
This illustration shows the removal of the TR-150 board for
CAMERA A.
The same method applies to the removal of the TR-150 board
for CAMERA B.
PSW3 x 6
PSW3 x 6
Radiation sheet (TR)
Heat sink (TR)
Connector screws
3. Install the removed parts by reversing the steps of removal.
MCC-3000MT
2-26