Sony MCC3000MT, Service Manual

Page: 53 / 194

2-13. PS-772 Board
Preparation
1. Remove the top cover. (Refer to “2-2. Top Cover” . )
Procedure
1. Remove the four screws.
B3 x 6
PS-772 board block
B3 x 6
This illustration shows the removal of the PS-722 board for
CAMERA A.
The same method applies to the removal of the PS-722 board
for CAMERA B.
Holes
2. Remove the two claws and Remove the PS bracket in the arrow direction.
3. Disconnect the three harnesses from the three connectors (CN1, CN2 and CN3) on the PS-772 board.
MCC-3000MT
2-21