99
L
Cannot log in.
Starting MASM-1 for the first
time?
Yes
Is “Config file is broken”
message displayed?
Yes
Is password correct?
No
Yes
Exit MASM-1, delete the Config file, and restart
MASM-1.
All settings are initialized. Register and
reconfigure the MAS-A100.
(See “6.5 MASM-1 settings initialization” (page
82))
Check use of upper/lower case, and check Caps
Lock is off.
(See “5.2 MAS-A100 initial setup using MASM-1”
(page 49))
Exit MASM-1, delete the Config file, and
restart MASM-1.
All settings are initialized. Register and
reconfigure the MAS-A100.
(See “6.5 MASM-1 settings initialization”
(page 82))
The password must be set upon first launch.
Enter the desired password.
(See “Default password setting” (page 48))
