– 8 –
KDF-60XBR950/70XBR950
K
RM-Y914
RM-Y914
SECTION 1
SELF DIAGNOSIS FUNCTION
1. Summary of Self-Diagnosis Function
- This device includes a self-diagnosis function.
- In case of abnormalities, the POWER/STANDBY indicator automatically blinks. It is
possible to predict the abnormality location by the number of blinks. The Instruction
Manual describes blinking of the POWER/STANDBY indicator.
- If the symptom is not reproduced sometimes in case of a malfunction, there is recording of
whether a malfunction was generated or not. Operate the remote command to confirm the
matter on the screen and to predict the location of the abnormality.
2. Diagnosis Items and Prediction of Malfunction Location
- When a malfunction occurs the POWER/STANDBY indicator only blinks for one of the
following diagnosis items. In case of two or more malfunctions, the item which first
occurred blinks. If the malfunctions occurred simultaneously, the item with the lower
blink count blinks first.
- The screen display displays the results regarding all the diagnosis items listed below.
The display "0" means that no malfunctions occurred.
Defected symptoms
Lamp cover error
3 times
- Lamp cover is not
attached securely.
Diagnosis Item
Number of times
POWER/STANDBY
indicator blinks
Probable Cause
Location
Power does not
turn on
0
- Power cord is not
plugged in.
- Fuse is burned out.
(F1901:F board)
- No picture/No sound
Temp error
4 times
Lamp driver error
5 times
- Lamp driver is faulty.
- No picture/No sound
+B OVP error
6 times
- +17V is not
supplied.(G1 board)
- No picture/No sound
- Lamp for the light
source burns out.
- No picture/No sound
- Audio line is shorted.(A,G1
board)
- IC8504 or IC8505 (A board)
is faulty.
- PS1601 or 1602 is
opened.(G1 board)
D-OVP error
8 times
- +3.3V or +2.5V or +1.8V is
over voltage.(G3 board)
- No picture/No sound
Fan stopped
4 times
- Fan1 or Fan2 or Fan3 or
Fan4 power is not
supplied.(A board)
- Fan connector is not
attached securely.
- No picture/No sound
- Power does not come on.
- No power is supplied to the
unit.
- AC power supply is faulty.
- Temperture is high.
-IIC-E line connector
(CN8041:A
board,CN3951:H4 board) is
not attached securely.
Lamp error
LAMP-LED flashes
- No picture/No sound
Audio error
7 times
- No picture/No sound
Summary of Contents for KDF-60XBR950 - 60" Rear Projection TV
