Sony KDF-60XBR950 - 60" Rear Projection TV, Service Manual

Page: 204 / 296

Installing and Connecting the LCD Projection TV
28
Cable Box and Cable
Only
For best results, use this connection if:
❑
Your cable company scrambles some channels, such as premium
channels (which requires you to use a cable box), but does not scramble
all channels.
❑
You do not have a VCR. (If you have a VCR, see pages 32 and 33.)
With this connection you can:
❑
Use the LCD projection TV remote control to change channels coming
through the cable box to the LCD projection TV’s VHF/UHF input jack.
(You must first program the remote control for your specific cable box;
see “Programming the Remote Control” on page 48.)
❑
Use the LCD projection TV remote control to change channels coming
directly into the LCD projection TV’s CABLE input. (The LCD
projection TV’s tuner provides a better signal than the cable box.)
Notes on Using This Connection
About Using This Connection with Dual Picture (Twin View, etc.)
Features
With this connection, you can use all the dual picture features for unscrambled
channels coming directly into the LCD projection TV’s CABLE input jack.
To Do This ... Do This ...
Use the cable box Tune the LCD projection TV to the channel the
cable box is set to (usually channel 3 or 4) and
then use the cable box to switch channels.
Set up the LCD projection TV
remote control to operate the
cable box Program the remote control. See “Programming
the Remote Control” on page 48.
Activate the remote control to
operate the cable box
Press FUNCTION
repeatedly until the
SAT/
CABLE
indicator lights up.
IN OUT
CABLE
VHF/UHF
Splitter
CATV cable
Coaxial
cable
Rear of LCD projection TV
Coaxial cable
Cable box
Coaxial cable