Sony JumboTron JME-SA200, Service Manual

Page: 26 / 58

1-22(E)
JME-SA200
42
Adjustment
Registering and Recalling the Unit/Cell Numbers
4
Recall the registered units/cells one by one.
As you press the
b button, the registered unit/cell numbers are recalled
in the display window one by one. By pressing the
B
button, they are
recalled in the reverse order.
* S C R E E N U N I T / R E C A L L *
M O D E : S E L E C T
S E L E C T : P R E V / N E X T
U N I T N U M B E R C E L L N o .
X Y Z P X P Y
4 / 3 / 1 0 / 0
D E L
D E L A L L
F 2 F 4
To flash the indicator on the rear panel of the unit
After recalling the unit/cell number in step 4 , press the ENTER button.
To stop flashing of the indicator
Press the MENU button. The display window returns to the SCREEN
UNIT CONTROL menu, and the indicator on the rear panel of the unit
stops flashing.
Notes
• If you press the ENTER button when there is no registered unit/cell
numbers, “DATA NOTHING!!” appears.
• If you press the
b
button when the last registered unit/cell number is
recalled, “Read NEXT NO DATA” appears.
• If you press the B button when the first registered unit/cell number is
recalled, “Read PREV NO DATA” appears.
Deleting the registered unit/cell number(s) from the memory
Use the F2 or F4 function button.
To delete all the registered unit/cell numbers
Press the F4 button.
To delete a specified unit/cell number
Recall the unit/cell number to be deleted, then press the F2 button.
Note
If you press the F2 or F4 button when there is no unit/cell number(s) to be
deleted, “DATA NOTHING!!” appears.
Adjustment
43
Adjusting the Monitor
You can adjust the position of the image and its boundary on the monitor
connected to the JTC-P200 ICU.
To select the memory number to which you want to store the adjusted data, see
“Selecting the memory number/adjusting the monitor by recalling the stored
conditions” on page 45.
Adjusting the position and boundary of the image on the monitor
1
Establish communication with the ICU controller (page 21) and
display the MAIN MENU.
2
Press the v or V button to select MONITOR CONTROL and press the
ENTER button.
The MONITOR CONTROL menu appears.
S W I T C H E R C O N T R O L
S I G N A L C O N T R O L
G E O M E T R Y C O N T R O L
M O N I T O R C O N T R O L
S C R E E N C O N T R O L
S C R E E N U N I T C O N T R O L
O T H E R C O N T R O L
* * * * * * M A I N M E N U * * * * * *
H C E N T E R 0
V C E N T E R 0
H B O U N D A R Y 6 4 0
V B O U N D A R Y 4 8 0
M E M O R Y N U M B E R 1
* * * M O N I T O R C O N T R O L * * *
3
Adjust the position and boundary of the image on the monitor.
Press the
v
or
V
button to select the adjustment item and press the
B
or
b button to change the value.
H C E N T E R 8
V C E N T E R 0
H B O U N D A R Y 6 4 0
V B O U N D A R Y 4 8 0
M E M O R Y N U M B E R 1
* * * M O N I T O R C O N T R O L * * *
Adjustment item How to adjust
H CENTER Shifts the position of the image horizontally.
Pressing the
b button moves the image to the right,
and pressing the B button to the left.
V CENTER Shifts the position of the image vertically.
Pressing the
b button moves the image upward, and
pressing the B button downward.
H BOUNDARY Adjusts the horizontal boundary of the image.
Pressing the
b button expands the horizontal
boundary, and pressing the B button reduces it.
V BOUNDARY Adjusts the vertical boundary of the image.
Pressing the
b button expands the vertical boundary,
and pressing the B button reduces it.
(continued)
Monitor adjustment items
Currently selected memory number