Sony JumboTron JME-SA200, Service Manual

Page: 28 / 58

1-24(E)
JME-SA200
46
Adjustment
Cutting Off the Image from the Screen
You can make the image on the screen disappear. This function is useful
when you check the light-emitting condition of the screen.
1
Establish communication with the ICU controller (page 21) and
display the MAIN MENU.
2
Press the v or V button to select OTHER CONTROL and press the
ENTER button.
The OTHER CONTROL menu appears.
S W I T C H E R C O N T R O L
S I G N A L C O N T R O L
G E O M E T R Y C O N T R O L
M O N I T O R C O N T R O L
S C R E E N C O N T R O L
S C R E E N U N I T C O N T R O L
O T H E R C O N T R O L
* * * * * * M A I N M E N U * * * * * *
S C R E E N I N F O
P R O D U C T I N F O
* * * * O T H E R C O N T R O L * * * *
3
Press the v or V button to select SCREEN INFO and press the ENTER
button.
The SCREEN INFO menu appears.
S C R E E N : C U T O F F
* * * * * S C R E E N I N F O * * * * *
S T A R T
F 2 F 4
S T O P
4
Press the
B
or
b
button to select CUT OFF.
S C R E E N : C U T O F F
S T A R T
F 2 F 4
S T O P
* * * * * S C R E E N I N F O * * * * *
5
Press the F2 button.
The image disappears from the screen.
To restore the image
Press the F4 button.
to make the image disappear
to restore the image
Adjustment
47
Displaying the Unit Address on the Screen
You can display the numbers set by the address switches located on the
rear of the unit on the screen.
1
Establish communication with the ICU controller (page 21) and
display the MAIN MENU.
2
Press the v or V button to select OTHER CONTROL and press the
ENTER button.
The OTHER CONTROL menu appears.
S W I T C H E R C O N T R O L
S I G N A L C O N T R O L
G E O M E T R Y C O N T R O L
M O N I T O R C O N T R O L
S C R E E N C O N T R O L
S C R E E N U N I T C O N T R O L
O T H E R C O N T R O L
* * * * * * M A I N M E N U * * * * * *
S C R E E N I N F O
P R O D U C T I N F O
* * * * O T H E R C O N T R O L * * * *
3
Press the v or V button to select SCREEN INFO and press the ENTER
button.
The SCREEN INFO menu appears.
S C R E E N : C U T O F F
* * * * * S C R E E N I N F O * * * * *
S T A R T
F 2 F 4
S T O P
4
Press the
B
or
b
button to select ADDRESS (ID) or ADDRESS (S.
No.)
S C R E E N : A D D R E S S ( I D )
S T A R T
F 2 F 4
S T O P
* * * * * S C R E E N I N F O * * * * *
5
Press the F2 button.
The selected address is displayed on the screen.
Example of ADDRESS (ID): 01 (lower two digits of the address
switch setting)
Example of ADDRESS (S. No.): S1 (highest one digit of the address
switch setting with prefix S (screen)).
To stop displaying the address
Press the F4 button.
ADDRESS (ID): to display the unit
address (lower two digits of the
address switch setting)
ADDRESS (S. No.): to display the screen
address (highest one digit of the
address switch setting)
to stop displaying the address
to display the address