Sony JumboTron JME-SA200, Service Manual

Page: 6 / 58

1-2(E)
JME-SA200
2
Table of Contents
For the customers in the U.S.A.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
Owner’s Record
The model and serial numbers are located on the rear.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony
dealer regarding this product.
Model No. JME-SA200 Serial No. _______________
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
Table of Contents
3
Table of Contents
Overview
About This Manual ............................................................ 5
Precautions ........................................................................ 5
Overview of the JumboTron System ............................... 6
Images to be displayed on the JumboTron screen .................. 6
Structure of the JumboTron screen ......................................... 7
Configuration of the JumboTron system ................................ 8
Features .............................................................................. 9
Locations and Functions of Parts and Controls
Locations and Functions of Parts and Controls .......... 10
Power Source and Connections
Power Source ................................................................... 11
Attaching the battery pack .................................................... 11
Detaching the battery pack .................................................... 12
Connections ..................................................................... 13
JumboTron system configuration .......................................... 13
Connections for using as wireless controller ........................ 14
Connections for using as wired controller ............................ 16
Registering the Phone Number for the Modem ............ 17
Attaching the Shoulder Strap ......................................... 19
Before Adjustment
Preparing the System ...................................................... 20
Communicating with the ICU Controller ....................... 21
When the unit is used as wireless controller ......................... 21
When the unit is used as wired controller ............................. 22
Setting the Information about the Screen ..................... 23
Selecting the Screen Display Mode and Input Signal .. 25
(continued)