A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Schedule — Schedule setting Menu / Setting the Alarm Buffer — Alarm buffer setting Menu
51
Setting the Schedule
— Schedule setting Menu
When you click
Schedule
on the Administrator menu,
the Schedule setting menu appears.
This is the same menu as the setting menu which is
displayed when you click
Schedule
to set Effective
period and Schedule in FTP client setting menu, e-Mail
(SMTP) setting menu, Image memory setting menu,
Alarm output 1, 2 setting menu and so on.
Example: When setting e-Mail (SMTP) (the alarm
sending) in the Schedule setting menu
Schedule selection
Select the list box to specify the schedule you want to
set.
e-Mail (SMTP) – Alarm
,
e-Mail (SMTP) –
Periodical
,
FTP – Alarm
,
FTP – Periodical
,
Image
memory – Alarm
,
Image memory – Periodical
,
Alarm output 1 – Alarm, Alarm output 1 – Timer,
Alarm output 2 – Alarm
or
Alarm output 2 – Timer
can be selected.
The time period on the right of the checked day is the
effective period of the schedule.
Mon (Monday) to Sun (Sunday)
The time period on the right of the checked day is the
effective period of the schedule.
Start time, End time
Specify the
Start time
and the
End time
.
Use the same time schedule every day
When this is checked, the
Start time
and
End time
set
to
Mon
(Monday) are applied to all days. In this case,
the
Start time
and
End time
of the other days than
Mon
(Monday) cannot be input.
OK/Cancel
See “Buttons common to every setting menu” on page
26.
Setting the Alarm Buffer
— Alarm buffer setting Menu
When you click
Alarm buffer
on the Administrator
menu, the Alarm buffer Setting menu appears.
You can set the Pre-alarm image and audio (the image
and audio before the alarm detection) and the Post -
alarm image and audio. These can be set when
Alarm
sending
or
Alarm recording
of FTP client setting menu
or Image memory setting menu is set to
On
, and besides
when
Use alarm buffer
is selected.
Video mode
The Video mode setting in the Common tab of the
Camera setting menu is displayed.
MPEG4:
Shows the present output format of the camera
is MPEG4.
JPEG:
Shows the present output format of the camera is
JPEG.
Recording capacity
Displays the maximum recording capacity of alarm
buffer in the present camera setting of the video mode,
image size, bit rate and frame rate.
Pre-alarm period:
Displays the maximum recording
capacity of image/audio before the alarm detection.
Post-alarm period:
Displays the maximum recording
capacity of image/audio after the alarm detection.
Recording time
Set the recording time for the Pre-alarm image/audio
and Post alarm image/audio.
Pre alarm period:
Type the recording time of the
image/audio before the alarm detection.
Post alarm period:
Type the recording time of the
image/audio after the alarm detection.
