A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory setting Menu
44
Sequence number:
A consecutive number of 10 digits
between 0000000001 and 4294967295 and two fixed
digits 00 is added to the Image file name.
Sequence number clear
Click
Clear
and the suffix of the sequence number
returns to 1.
Interval
Type the interval at which you want to send images to
the FTP server periodically. You can set the hour (H),
minutes (M) and seconds (S) between 1 second and 24
hours (one day).
Note
The actual interval may be longer than the set value,
depending on the image size, image quality setting, bit
rate and the network environments.
Effective period
Set the period when the periodical sending is effective.
Always:
The periodical sending is always effective.
Schedule:
You can specify the period when the
periodical sending is effective in the schedule setting
in the other section.
Click
Schedule
and the setting menu for the effective
period is displayed. (“Setting the Schedule —
Schedule setting Menu” on page 51)
OK/Cancel
See “Buttons common to every setting menu” on page
26.
Recording Images in
Memory
— Image memory setting Menu
When you click
Image memory
on the Advanced mode
menu, the Image memory setting menu appears.
By using the image memory function, you can record the
image and audio file, which has been shot being linked
with the external sensor input or with the built-in motion
detection function, to the built-in memory (about 8 MB)
of the camera. The image file can also be recorded
periodically.
You can also record a still image periodically.
The recorded image and audio files can be found or
downloaded to the computer using the FTP server
function. (See “Sending an Image via mail — e-Mail
(SMTP) setting Menu” on page 39.)
Image memory setting menu is composed of three tabs
Common
,
Alarm recording
and
Periodical recording
.
Notes
• The image and audio files recorded in the built-in
memory will be erased when the power of the camera
is turned off.
• The frame rate and operability on the main viewer
may decrease during image storage in the built-in
memory.
• When the Overwrite is set to
On
, a warning mail is not
sent to the Administrator.
Common Tab — Setting the Image
memory Function
Image memory
Set whether you use the Image memory function or not.
When you select
On
, the Common setting options are
displays in the below. If you do not use it, select
Off
and
click
OK
.
Free space
Shows the current free space of the built-in memory.
