95
2-12. Rear Assembly
Preparation
1. Remove the top cabinet and the bottom cover. (Refer to “2-2. Top Cabinet, Bottom Cover”.)
2. Remove the inside panel. (Refer to “2-3. Inside Panel”.)
3. Remove the outside panel. (Refer to “2-4. Outside Panel”.)
4. Remove the VC-1046 board. (Refer to “2-5. VC-1046 Board”.)
5. Remove the CK-1027 board. (Refer to “2-8. CK-1027 Board”.)
6. Remove the VF-1024 board. (Refer to “2-10. VF-1024 Board”.)
Procedure
1. Release the hole of the flexible board from the boss.
2. Remove the two screws, and then remove the harness top guide.
3. Release the two fine-wire coaxial cables from the groove.
Note
Before installing the harness top guide, arrange the two fine-wire coaxial cables as shown in the
figure.
P1.7 x 3
Flexible board
Hole
Boss
Harness top guide
Fine-wire coaxial cables
Fine-wire
coaxial cables
Groove
Arrangement of fine-wire coaxial cable