60
2-3-7. WB-1002 Board
Preparation
1. Remove the top cabinet and the bottom cover. (Refer to “2-2. Top Cabinet, Bottom Cover”.)
2. Remove the inside panel. (Refer to “2-3. Inside Panel”.)
3. Remove the HP-1015 board. (Refer to “2-3-2. HP-1015 Board”.)
4. Remove the FU-1001 board assembly. (Refer to “2-3-5. FU-1001 Board”.)
5. Remove the TG-1005 board assembly and the SH-1030 board. (Refer to “2-3-6. TG-1005 Board,
Procedure
1. Remove the WB-1002 board assembly.
Note
•
When installing the WB-1002 board assembly, insert the two A portions into the two grooves, and
align the boss with the hole.
•
After installing the WB-1002 board assembly, check that the outer shape of the WB-1002 board
and the outer shape of the AF button rubber (88100) match.
A
Grooves
Boss
WB-1002 board assembly
AF button rubber
(88100)
Tip
Confirmation at the time of installation
WB-1002 board
Hole
PUSH AUTO button plate
At the time of installation, pull the PUSH AUTO
button plate in the direction of the arrow to
attach it.