41
2-2. Top Cabinet, Bottom Cover
Procedure
1. Release the hooks, and then remove the handle connector protective cap.
2. Remove the six screws, and then remove the top cabinet.
3. Remove the megeyar hook.
Note
•
At the time of installation, apply the loctite 243 to tips of the six screws.
•
When installing the top cabinet, push the outside panel and inside panel in the direction of the
arrow, and then tighten the screws in the following sequence: (a), (b), (c), (d), (e), (f).
P2.6 x 5
Handle connector
protective cap
Top cabinet
Megeyar hook
Hooks
Outside panel
Screw tightening sequence and pushing directions
Inside panel
d
b d
b d
e f
e f
c a
c a
b
e
f
c
a