98
Adjustments and Settings from Menus
Chap
te
r 5
Men
u
Dis
p
la
ys
a
nd Det
a
iled
S
e
ttin
gs
using other menus. The function assigned to the
ASSIGN 2 switch takes precedence over the menu
setting.
4
Turn the MENU knob to move the
b
mark to the item
you want to assign to the assignable switch, then push
the MENU knob.
The setting is executed and the FUNCTION 1 page
appears again.
To continue to assign a function to another
assignable switch
Repeat steps
3
and
4
.
5
To end the menu operation, set the MENU ON/OFF
switch to OFF.
To return to the FUNCTION 1 page
Turn the MENU knob to move the
b
mark to ESC at the
top right of the window, then push the MENU knob.
Operation of the assignable switches
when UA01 to UA10 are assigned
The following shows an example of how to use the
assignable switch to which the function registered in UA01
to UA10 on the ASSIGN EDIT page has been assigned.
In the following example, the FAN ON/OFF function on
the FUNCTION 3 page of the MAINTENANCE menu is
assigned.
1
Push the corresponding assignable switch.
The item and the current setting are displayed on the
viewfinder screen.
2
Push the MENU knob while the item and the current
setting are displayed.
“:” appears at the left of the item.
3
Turn the MENU knob to change the setting while “:”
is displayed.
Viewfinder screen display
When the function is assigned to the ASSIGN 1 switch
(push-type), the display disappears from the viewfinder
screen 3 seconds after you perform the last operation.
When the function is assigned to the ASSIGN 2 switch
(slide-type), the display remains while the ASSIGN 2
switch is set to the ON position (slide it in the direction of
the arrow). To make the display disappear, set the switch to
OFF.
5-3-6 Setting the Date/Time of the
Internal Clock
You can set or change the date and time of the internal
clock. The date and time set are reflected in the time code.
1
Holding down the MENU knob, move the MENU ON/
OFF switch to ON.
The TOP menu appears.
2
Turn the MENU knob to move the
b
mark to
“DIAGNOSIS,” then push the MENU knob.
If this is the first time the DIAGNOSIS menu has been
displayed, the CONTENTS page appears. If the menu
has been used before, the page accessed last appears.
3
If the CONTENTS page is displayed, turn the MENU
knob to move the
b
mark to TIME/DATE, then push
the MENU knob to display the TIME/DATE page.
If a different page is displayed, turn the MENU knob
until the TIME/DATE page appears, then push the
MENU knob to select that page.
The
b
mark moves to “ADJUST.”
TIME/DATE page
