Sony HDW-790, Operation Manual

Page: 87 / 176

87
Status Display on the Viewfinder Screen
Chap
te
r 5
Men
u
Dis
p
la
ys
a
nd Det
a
iled
S
e
ttin
gs
1) The SLS mode is effective only when an optional HKDW-905R
extension board is installed.
2) Depending on the frame frequency currently selected.
For details, see “4-2-1 Shutter Modes” on page 62 .
7
Perform the settings for each item.
1
Turn the MENU knob to move the
b
mark to the
item you want to set, then push the MENU knob.
The
b
mark on the left of the selected item changes
to a z mark, and the z mark on the left of the
setting changes to a ? mark.
2
Turn the MENU knob to change the setting, then
push the MENU knob.
3
To continue setting other items, repeat steps
1
and
2
.
8
To end the menu operation, set the MENU ON/OFF
switch to OFF.
When you change the settings only on the ‘!’ LED
page
The ‘!’ LED page is also registered in the USER menu.
You can access this page without opening the TOP page.
Open the USER menu by pressing the MENU ON/OFF
switch and display this page from the USER menu.
5-2-5 Setting Marker Display
The MARKER 1 page of the USER menu allows you to
switch the display of the center and safety zone markers on
or off and to select the area indicated by the safety zone
marker.
1
Set the MENU ON/OFF switch to ON.
The menu page accessed last appears on the
viewfinder screen.
2
Turn the MENU knob until the MARKER 1 page
appears, then push the MENU knob to select the page.
The current setting of each item appears on the right of
the item.
You can set the following items on the MARKER 1
page.
1) The ASPECT MASK item is for processing the signal to be output to
the viewfinder. When R, G, or B is selected for the OUTPUT
SELECT item from the menu, the masked video signal is output to
the TEST OUT connector.
Item Description
GAIN GAIN switch position L, M, H, or
0 dB
SHUTTER
Shutter mode OFF, ECS, SLS
1)
,
1/60
2)
WHITE BAL White balance automatic
adjustment memory, P (PRST), A,
B, PA, PB, or AB
5600K 5600K mode ON or OFF
ATW ATW ON or OFF
EXTENDER Extender ON or OFF
FILTER ND ND Types of the ND filter, 1, 2, 3,
or 4
FILTER CC CC Types of the CC filter, A, B, C,
or D
OVERRIDE ON or OFF when the reference
value of the auto iris adjustment is
other than the standard value
Item Description
MARKER When you do not want to display all
markers, set to OFF.
CENTER To display the center marker, set to ON.
CENTER
MARK Selects the type of center marker (1 to
4), when CENTER is set to ON.
SAFETY
ZONE To display the safety zone, set to ON.
SAFETY
AREA Selects the safety zone range (80%,
90%, 92.5% or 95%), when SAFETY
ZONE is set to ON.
ASPECT To display the aspect marker, set to ON.
ASPECT
SELECT Selects the type (15:9, 14:9, 13:9, 4:3,
1.85, 2.35) of the aspect marker.
ASPECT
MASK
1)
To make the areas out of the selected
aspect marker dimmer, set to ON.
ASPECT
MASK LVL Sets the mask level (0 to 8), when the
ASPECT MASK is set to ON.
100%
MARKER To display the effective pixel area, set to
ON.
CANCEL/PRST /
ESCAPE switch
MENU ON/OFF switch MENU knob