Sony Handycam DCR-TRV11, Service Manual

Page: 70 / 215

2-12
2-13.HINGE ASSEMBLY, LCD HARNESS PROCESSING
Start repair work after removing LCD by performing steps
1
–
6
of 2-1 or 2-2 and remove the CK-92/94 board by
performing steps
1
–
0
of 2-5.
1
Two screws (M1.7)
with scotch grip
Extra length is not
required in LCD.
Create an extra length
to allow opening and closing.
Be careful thet harness must not
protrude from upper and lower side.
Allow extra length of
this extent in the cabinet.
4
Harness (PC-118) (12P)
3
Harness (PC-119) (14P)
2
FP-181 flexible board
9
FP-181
flexible board
5
1
Two screw (M1.7
×
4),
lock ace, p2
5
Hinge cover (front)
PD-
Board
CK-
Board
4
Hinge cover (rear)
2
Screw (M1.7
×
4),
lock ace, p2
3
Two claws
q;
Hinge assembly
6
Harness
(PC-118) (12P)
7
Harness
(PC-119) (14P)
8
Screw
(M1.7
×
2.5)
PRECAUTION DURING INSTALLATION (LCD HARNESS PROCESSING)
Be careful not to be
caught by other parts.
Be careful not to be
caught by other parts.
Be careful not to be
caught by other parts.