Sony Handycam DCR-TRV11, Service Manual

Page: 146 / 215

5-31
16. White Balance Check
Subject Clear chart (Color reproduction
adjustment frame)
Filter Filter C14 for color temperature
correction
ND filter 1.0 and 0.4 and 0.1
Measurement Point Video output terminal
Measuring Instrument Vectorscope
Specified Value Fig. 5-1-13. A to C
Switch setting:
1)
POWER .................................................................. CAMERA
2) NIGHT SHOT .................................................................. OFF
3) DIGITAL ZOOM (Menu display) ................................... OFF
Checking method:
1)
Check that the lens is not covered with either filter.
2) Select page: 6, address: 01, set data: 0F, and press the PAUSE
button of the adjustment remote commander.
3) Check that the center of the white luminance point is within
the circle shown Fig. 5-1-13. (A).
4) Select page: 6, address: 01, set data: 23, and press the PAUSE
button.
5) Place the C14 filter on the lens.
6) Check that the center of the white luminance point settles in
the circle shown Fig. 5-1-13. (B).
7) Remove the C14 filter, and place the ND filter 1.5 (1.0+0.4+0.1)
on the lens.
8) Check that the white luminance point stopped moving, and then
remove the ND filter 1.5.
9) Check that the center of the white luminance point settles within
the circle shown Fig. 5-1-13. (C).
Processing after Completing Adjustments:
1)
Select page: 6, address: 01, set data: 00, and press the PAUSE
button.
17. Mechanical Shutter Adjustment
Adjust the period which the mechanical shutter is closed, and
compensate the exposure.
17-1. Mechanical Shutter Data Input
(DCR-TRV6/TRV6E/TRV11/TRV11E)
Adjustment Page F 7
Adjustment Address 70 to 84 23 to 26
Input method:
1)
Select page: 0, address: 01, and set data: 01.
2) Input the following data to page: F, addresses: 70 to 84.
Note:
Press the PAUSE button of the adjustment remote commander
each time to set the data.
R-Y
2mm
B-Y
2mm
Fig. 5-1-13. (A)
Fig. 5-1-13. (B)
Fig. 5-1-13. (C)
R-Y
B-Y
1.0mm
1.0mm
3mm
3mm
R-Y
B-Y
3mm
3mm
2.0mm
1.0mm
3) Input the following data to page: 7, addresses: 23 to 26.
Note: Press the PAUSE button of the adjustment remote commander
each time to set the data.
4) Select page: 0, address: 01, and set data: 00.
Address
70
71
72
73
74
75
76
77
78
79
7A
7B
7C
7D
7E
7F
80
81
82
83
84
Data
C4
0E
75
0C
26
0B
35
0A
6E
09
A5
61
A1
79
64
81
82
84
B5
7B
20
Address
23
24
25
26
Data
7C
7F
7C
7B