Sony Handycam DCR-TRV11, Service Manual

Page: 129 / 215

5-14
1-2-2. INITIALIZATION OF B PAGE DATA
(DCR-TRV11/TRV11E/TRV20/TRV20E)
Note:
When reading the B page data, insert a “Memory Stick” into the
“Memory Stick” slot.
Switch setting:
POWER ................................................................. MEMORY
1. Initializing the B Page Data (DCR-TRV20/TRV20E)
Note: If the B page data has been initialized, the following adjustments
need to be performed again.
1) Modification of B page data
Adjusting page B
Adjusting Address 00 to FF
Initializing Method:
1)
Select page: 0, address: 01, and set data: 01.
2) Select page: 2, address: 8F, set data: 02, and press the PAUSE
button.
3) Select page: 2, address: 8F, set data: 03, and press the PAUSE
button.
4) Select page: 2, address: 8F, set data: 02, and press the PAUSE
button.
5) Select page: 2, address: 8F, set data: 00, and press the PAUSE
button.
6) Select page: 5, address: 01, set data: F3, and press the PAUSE
button.
7) Select page: 5, address: 00, set data: 01, and press the PAUSE
button.
8) Select page: 5, address: 01, and wait for three seconds.
9) Select page: 5, address: 00, and check that the data is “00”.
10) Select page: 5, address: 02, and check that the data is “00”.
11) Perform “Modification of B Page Data”.
2. Modification of B Page Data (DCR-TRV20/TRV20E)
If the B page data has been initialized, change the data of the “Fixed
data-2” address shown in the following tables by manual input.
Preparations:
1)
Select page: 2, address: 8F, set data: 02, and press the PAUSE
button.
2) Select page: 2, address: 8F, set data: 03, and press the PAUSE
button.
3) Select page: 2, address: 8F, set data: 02, and press the PAUSE
button.
4) Select page: 2, address: 8F, set data: 00, and press the PAUSE
button.
Modifying Method:
1)
Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the camcorder may
not operate.
3) When changing the data, press the PAUSE button of the
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
Processing after Completing Modification of B Page data:
1)
Select page: 2, address: 00, and set data: 29.
2) Select page: 2, address: 01, set data: 29, and press the PAUSE
button.
3. Initializing the B Page Data (DCR-TRV11/TRV11E)
Note:
If the B page data has been initialized, the following adjustments
need to be performed again.
1) Modification of B page data
Adjusting page B
Adjusting Address 00 to FF
Initializing Method:
1)
Select page: 0, address: 01, and set data: 01.
2) Select page: 2, address: 8F, set data: 02, and press the PAUSE
button.
3) Select page: 2, address: 8F, set data: 03, and press the PAUSE
button.
4) Select page: 2, address: 8F, set data: 02, and press the PAUSE
button.
5) Select page: 2, address: 8F, set data: 00, and press the PAUSE
button.
6) Select page: 5, address: 0E, set data: 00, and press the PAUSE
button.
7) Select page: 5, address: 01, set data: F3, and press the PAUSE
button.
8) Select page: 5, address: 00, set data: 01, and press the PAUSE
button.
9) Select page: 5, address: 0E, and check that the data is “01”.
10) Perform “Modification of B Page Data”.
4. Modification of B Page Data (DCR-TRV11/TRV11E)
If the B page data has been initialized, change the data of the “Fixed
data-2” address shown in the following tables by manual input.
Preparations:
1)
Select page: 2, address: 8F, set data: 02, and press the PAUSE
button.
2) Select page: 2, address: 8F, set data: 03, and press the PAUSE
button.
3) Select page: 2, address: 8F, set data: 02, and press the PAUSE
button.
4) Select page: 2, address: 8F, set data: 00, and press the PAUSE
button.
Modifying Method:
1)
Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the camcorder may
not operate.
3) When changing the data, don’t press the PAUSE
button.
Processing after Completing Modification of B Page data:
1)
Select page: 5, address: 0E, set data: 00, and press the PAUSE
button.
2) Select page: 5, address: 01, set data: FB, and press the PAUSE
button.
3) Select page: 5, address: 00, set data: 01, and press the PAUSE
button. (The changed data are written in the flash memory.)
4) Select page: 5, address: 0E, and check that the data is “01”.
5) Select page: 2, address: 00, and set data: 29.
6) Select page: 2, address: 01, set data: 29, and press the PAUSE
button.
Ver 1.1 2000. 06