Sony Handycam DCR-TRV11, Service Manual

Page: 144 / 215

5-29
13. MAX GAIN Adjustment
Setting the minimum illumination.
If it is not consistent, the image level required for taking subjects in
low illuminance will not be produced (dark).
13-1. MAX GAIN Adjustment
(DCR-TRV6/TRV6E/TRV11/TRV11E)
Subject Clear chart
(Color reproduction adjustment
frame)
Adjustment Page F
Adjustment Address 1D
Switch setting:
1)
POWER .................................................................. CAMERA
2) NIGHT SHOT .................................................................. OFF
3) STEADY SHOT (Menu display) ..................................... OFF
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2) Select page: 6, address: 96, and set data: 00.
3) Select page: 6, address: 97, and set data: 27.
4) Select page: 6, address: 01, set data: 6F, and press the PAUSE
button of the adjustment remote commander.
(The MAX GAIN adjustment is performed and the adjustment
data is stored in page: F, address: 1D.)
5) Select page: 6, address: 02, and check that the data is “01”.
Processing after Completing Adjustments:
1)
Select page: 6, address: 01, set data: 00, and press the PAUSE
button.
2) Select page: 6, address: 97, and set data: 00.
3) Select page: 0, address: 01, and set data: 00.
13-2. MAX GAIN Data Input (DCR-TRV20/TRV20E)
Adjustment Page F
Adjustment Address 1D, 8C, 9E, 9F
Input method:
1)
Select page: 0, address: 01, and set data: 01.
2) Input the following data to each address.
Note: Press the PAUSE button of the adjustment remote commander
each time to set the data.
3) Select page: 0, address: 01, and set data: 00.
14. Auto White Balance & LV Standard Data Input
Subject Clear chart
(Color reproduction adjustment
frame)
Measurement Point Display data of page 1 (Note3)
Measuring Instrument Adjustment remote commander
Adjustment Page F
Adjustment Address 1E, 1F, 30 to 33
Specified Value 0FF0 to 1010
Note1:
This adjustment should be carried out upon completion of “Color
Reproduction Adjustment”.
Note2:
Check that the data of page: 6, address: 02 is “00”. If not, turn off
the power and turn on again.
Note3:
Displayed data of page 1 of the adjustment remote commander.
1 : XX : XX
Display data
Switch setting:
1)
POWER .................................................................. CAMERA
2) NIGHT SHOT .................................................................. OFF
3) DIGITAL ZOOM (Menu display) ................................... OFF
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2) Select page: 6, address: 01, set data: 11, and press the PAUSE
button of the adjustment remote commander.
3) Select page: 6, address: 01, set data: 0D, and press the PAUSE
button.
(When the standard data is take in, the data will be automatically
input to page: F, address: 1E, 1F, 30 to 33.)
4) Select page: 6, address: 02, and check that the data is “01”.
5) Select page: F, address: 10, set data: 2E, and press the PAUSE
button.
6) Select page: 1, and check that the display data (Note3) satisfies
the specified value.
Processing after Completing Adjustments:
1)
Select page: F, address: 10, set data: 00, and press the PAUSE
button.
2) Select page: 6, address: 01, set data: 00, and press the PAUSE
button.
3) Select page: 0, address: 01, and set data: 00.
4) Perform “Auto White Balance Adjustment”.
Address
1D
8C
9E
9F
Data
80
02
00
00