Sony Handycam DCR-PC5 Operating Instructions Manual Download Page 17

Page: 17 / 156

Getting started

Notes

•When using the touch panel, press operation buttons with your thumb supporting the

LCD screen from the back side of it or press those buttons lightly with your index
finger. Do not press them with sharp-pointed objects such as pens.

•Do not press the LCD screen too hard.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You

can control the display with DISPLAY/TOUCH PANEL on your camcorder.

•When operation buttons do not work even if you press them, an adjustment is

required (CALIBRATION) (p. 141).

•When the LCD screen gets dirty, use the supplied cleanig cloth.

When executing each item

The green bar appears above the item.

If the items are not available

The color of the items changes to gray.

Touch panel

You can operate with the touch panel using the viewfinder (p. 124).

Press FN to display the following buttons:

In CAMERA mode

PAGE1

MENU, END SEARCH, FADER, DIGITAL EFFECT, MEMORY MIX,
EXPOSURE

PAGE2

TITLE, LCD BRIGHT, VOLUME

PAGE3

SELFTIMER

In VCR mode

PAGE1

MENU, LCD BRIGHT, VOLUME, END SEARCH

PAGE2

TITLE, DIGITAL EFFECT, PB ZOOM

PAGE3

DATA CODE, REC CONTROL

See p. 99 for MEMORY mode.

Step 3 Using a touch panel

Summary of Contents for Handycam DCR-PC5





























































































































































Search results

Summary of Contents for Handycam DCR-PC5

Reviews:

Sony Handycam DCR-PC5, Operating Instructions Manual, Page: 17 / 156

Search results

Summary of Contents for Handycam DCR-PC5

Reviews: