Sony Handycam DCR-PC5 Operating Instructions Manual Download Page 14

Page: 14 / 156

Step 1 Preparing the power supply

1, 2

To remove the connecting plate

The connecting plate is removed in the same way as the battery pack.

WARNING

The power cord must only be changed at a qualified service shop.

PRECAUTION

The set is not disconnected from the AC power source (house current) as long as it is
connected to the wall outlet, even if the set itself has been turned off.

Using a car battery

Use Sony DC Adaptor/Charger (not supplied).

Connecting to a wall outlet

When you use your camcorder for a long time, we recommend that you power it from a
wall outlet using the AC adaptor.

(

)

Connect the supplied connecting cord to the DC OUT jack on the AC adaptor.

(

)

Slide the connecting plate in the direction of the arrow.

(

)

Connect the power cord to the AC adaptor.

(

)

Connect the power cord to a wall outlet.

Summary of Contents for Handycam DCR-PC5





























































































































































Search results

Summary of Contents for Handycam DCR-PC5

Reviews:

Sony Handycam DCR-PC5, Operating Instructions Manual, Page: 14 / 156

Search results

Summary of Contents for Handycam DCR-PC5

Reviews: