Sony Handycam DCR-PC5 Operating Instructions Manual Download Page 141

Page: 141 / 156

141

Additional Information

Ajusting the LCD screen (CALIBRATION)

The buttons on the touch panel may not work correctly. If this happens, follow the
procedure below.

(

)

Set the POWER switch to OFF.

(

)

Eject the tape from your camcorder, then disconnect any connecting cable from
your camcorder.

(

)

Set the POWER switch to VCR while pressing DISPLAY/TOUCH PANEL on
your camcorder, then keep pressing DISPLAY/TOUCH PANEL for about five
seconds.

(

)

Follow the procedure below using an object such as the corner of the “Memory
Stick” supplied with your camcorder.

Touch at the upper left corner.

Touch at the lower right corner.

Touch in the middle of the screen.

Note

If you do not press the right spot, always returns to the position at the upper left
corner. In this case, start from step 4 again.

Maintenance information and precautions

CALIBRATE

Summary of Contents for Handycam DCR-PC5





























































































































































Search results

Summary of Contents for Handycam DCR-PC5

Reviews:

Sony Handycam DCR-PC5, Operating Instructions Manual, Page: 141 / 156

Search results

Summary of Contents for Handycam DCR-PC5

Reviews: