Sony Handycam DCR-PC10, Service Manual

Page: 95 / 181

5-18
1-2-16. Auto White Balance Reference Data Input
Purpose: Adjust the reference white balance at 3200K,
and calibrate the camera from white balance
variations.
Adjustment error:
The pre-set white balance will become poor.
Subject Clear chart
(Color bar standard picture frame)
Adjustment Page F
Adjustment Address 20 to 23
Note 1:
Perform “Color Reproduction Adjustment” before this
adjustment.
Note 2: Check that the of page: 6, address: 02 is 00. If not, turn
the power of the unit OFF/ON.
Adjustment procedure:
Processing after Adjustments:
Order Page Address Data Procedure
1 Turn OFF the main power of the unit then back ON.
2 Shoot a Clear chart with the standard picture frame.
3 6 00 01 Set the data. (Preparation)
4 Wait for 2 seconds.
5 6 01 11 After setting the data, press the PAUSE button.
6 6 01 0D After setting the data, press the PAUSE button. (When the standard data is taken in, the
data will be automatically input to addresses 20 to 23 of page F.)
7 6 02 Confirm that the data is 01.
8 Perform “Auto White Balance Adjustment”.
Order Page Address Data Procedure
1 6 01 00 After setting the data, press the PAUSE button.
2 6 00 00 Set the data. (End)