Sony Handycam DCR-PC10, Service Manual

Page: 141 / 181

5-74
4-2. SERVICE MODE
4-2-1. Setting the Test Mode
Page D Address 10
Data Function
00 Normal
01 Forced camera power ON
02 Forced VTR power ON
03 Forced VTR power ON
• Set/release each test mode. Set page: 0, address: 01, data: 01 before
setting the data of page D.
• For page D, the data set is recorded in the non-volatile memory
by pressing the PAUSE button of the adjusting remote commander.
In this case, take note that the test mode will not be exited even
when the main power is turned off (8.4 Vdc).
• After completing adjustments/repairs, be sure to return the data
of this address to 00, and press the PAUSE button of the adjusting
remote commander.
Set page: 0, address: 01, data: 00.
4-2-2. Use History Check
Page 2 Address 35 to 3D
How to use:
1)
The record of use data is displayed at addresses : 35 to 3D on
page 2.
Note: This data will be cleared when the button battery is removed
(reset). Be sure to read the data before disassembling the
set.
Address
35
36
37
38
39
3A
3B
3C
3D
Function
Hour (H)
Drum rotation counted time (BCD code) Hour (L)
Hour
Year
User initial power on date (BCD code) Month
Day
Final condensation occurrence date
Year
(BCD code)
Month
Day
Remarks
1 to 59 minute
1 to 99 hour
100 to 9000 hour
After setting the clock, set the date of power on next.