Sony Handycam DCR-PC10, Service Manual

Page: 118 / 181

5-46
2. Switching Position Adjustment (MR-39 Board)
Mode Playback
Signal SW/OL reference tape
Measurement Point Display data of page: 3, address: 03 of
Measuring Instrument the adjustment remote commander.
Adjustment Page C
Adjustment Address 4C, 4D, 4E, 4F
Specified Value 00
Adjustment procedure:
Order Page Address Data Procedure
1 0 01 01 Set the data. (Preparation)
2 Playback the SW/OL reference tape in VTR mode.
3 3 01 0E After setting the data, press the PAUSE button.
4 3 02 Check that the data of page: 3, address: 02 has changed from 0E to 00.
5 3 03 Check that the data pf page: 3, address: 03 is 00.
6 Set the HOLD switch of the adjustment remote commander to OFF, and wait more than 2
seconds (so that the adjustment data is automatically written is page: C, addresses: 4C to 4F.)
7 0 01 00 Set the data.
8 Push EJECT button to take the SW/OL reference tape out.
9 Turn OFF the power switch.