Sony Handycam DCR-PC10, Service Manual

Page: 112 / 181

5-40
3-1-5. Connection of Equipment
Connect the measuring instruments as shown in Fig. 5-3-3.
The color bar signal which is recorded in the alignment tape.
Note:
Measured at video input/output connector (across 75
Ω
termination).
3-1-6. Output Level and Impedance
Video output Pin jack
Output signal : 1Vp-p, 75
Ω
unbalanced,
sync negative
S video output 4-pin mini DIN
Luminance signal :
1Vp-p, 75
Ω
, unbalanced, sync negative
Chrominance signal :
0.286Vp-p (NTSC) 75
Ω
, unbalanced
0.3Vp-p (PAL) 75
Ω
, unbalanced
Adjusting remote
commander
I/O baord-1 jig
(J-6082-372-C)
LANC terminal
26-pin
MULTI connector AUDIO VIDEO OUT/
HEADPHONES jack
Main unit
TV monitor
VIDEO
AUDIO L (White)
AUDIO R (Red)
Fig. 5-3-5 Color bar signal of PAL alignment tape
Burst signal
1V
0.7V
0.3V
Horizontal SYNC signal
White (100%)
0.3V
(100%)
White Y
ellow
Cyan
Green
Magenta
Red
Blue
Black
Yellow
Cyan
Green
Magenta
Red
Blue
Black
Burst signal
Horizontal SYNC signal
(100%)
White
Yellow
Cyan
Green
Magenta
Red
Blue
Black
White
Y
ellow
Cyan
Green
Magenta
Red
Blue
Q I
(75%)
0.286V
0.286V
0.714V
1V
White (100%)
White (75%)
Q I
Fig. 5-3-4 Color bar signal of NTSC alignment tape
For NTSC model
For PAL model
Fig. 5-3-3.
Color bar signal waveform
Audio output Special stereo mini jack
Output level : 327mV
(at load impedance 47k
Ω
)
Output impedance : 2.2k
Ω
or less
Color bar signal waveform
Color bar signal waveform
Color bar signal waveform