Sony FX 6 Quick Start Manual Download Page 95

Page: 95 / 185

Focus Tracking: Difference between Hybrid

Focus and Total Auto Focus

hybrid

focus mode, the camera can track

any object

and the focus will remain on

that object.
In

total

auto focus mode,

faces and eyes have priority

. You can initially track any

object but as soon as a person enters the frame, the camera will

automatically

shift

focus to their face and eyes.
In

hybrid

focus mode, any object can be tracked and will remain being tracked,

even if a person walks into the shot. Only if a person wanders across the tracked

subject, does the auto focus tracking shift to the person.
A

white square

hovering over the object will show who/what is being tracked.

Summary of Contents for FX 6


























































































































































































Search results

Summary of Contents for FX 6

Reviews:

Related manuals for FX 6

Brands by name

Popular brands

Sony FX 6, Quick Start Manual

Search results

Summary of Contents for FX 6

Reviews:

Related manuals for FX 6

Brands by name

Popular brands