Sony FX 6 Quick Start Manual Download Page 83

Page: 83 / 185

Focusing: Manual, Hybrid and Total Auto

With the Sony kit lens (or other Sony lenses) working in conjunction in the

camera, there are three possible focus “modes”: manual, hybrid, and total

auto.
Leaving aside the “total” manual option, because it is largely redundant, this

section will concentrate on the Hybrid and Total Auto Focus modes.

Hybrid mode

focusing allows you to easily switch between manual and auto

focus. There is no other camera where this switch is so intuitive!
In

Total Auto Focus

, manual focus is technically possible, but not practical.

The focus tracking option is quite different in this mode.
Both modes have their uses, but the Hybrid mode is the most flexible.

Summary of Contents for FX 6


























































































































































































Search results

Summary of Contents for FX 6

Reviews:

Related manuals for FX 6

Brands by name

Popular brands

Sony FX 6, Quick Start Manual

Search results

Summary of Contents for FX 6

Reviews:

Related manuals for FX 6

Brands by name

Popular brands