Sony FX 6 Quick Start Manual Download Page 30

Page: 30 / 185

The Microphone

Never use the internal camera microphone as your primary source of audio. Use

the Sony ECM-VG1 super-cardioid mono condenser microphone. This is a

reasonable option for recording if the subject is close to the camera (speaking no

more than 6ft to 8ft away and directly at the camera).
The microphone is directional: what the camera is pointing at will be recorded.
Because the microphone is mounted on the camera it will pick up some camera

noise and fan noise.

The camera has a rubber adapter to fit

the microphone in the holder. Use it
for other hyper cardioid type of
microphones as well. The Sennheiser

416 can be used directly on the
camera, for example.

Summary of Contents for FX 6


























































































































































































Search results

Summary of Contents for FX 6

Reviews:

Related manuals for FX 6

Brands by name

Popular brands

Sony FX 6, Quick Start Manual

Search results

Summary of Contents for FX 6

Reviews:

Related manuals for FX 6

Brands by name

Popular brands