Sony FWD-32LX1R Mounting Bracket, Operating Instructions Manual

Page: 80 / 316

32
(GB)
Viewing two pictures at
the same time
You can show two pictures from different signal
sources, such as a computer and a video, side by side.
1
Press MENU.
The main menu appears on the screen.
PICTURE/SOUND CONTROL
Picture Mode:
Adjust Picture
Adjust Sound
Vivid
Set ENTER Exit MENU Select
2
Press
M
/
m
to move the cursor (yellow) to
“PICTURE AND PICTURE (PAP)” and press
ENTER.
The PICTURE AND PICTURE (PAP) menu
appears on the screen.
PICTURE AND PICTURE(PAP)
PAP:
Active Picture
Picture Size
Picture Position
Off
Exit
MENU
Select Set
ENTER
3
Press M / m to move the cursor (yellow) to “PAP”
and press ENTER.
The following menu appears on the screen.
PICTURE AND PICTURE(PAP)
PAP:
Active Picture
Picture Size
Picture Position
Off
Exit
MENU
Select Set
ENTER
Off
P&P
PinP
4
Select the PAP mode with
M
/
m
.
Off : Disables PAP function.
P&P : Shows two pictures side by side at the same
time.
PinP : Shows an inset picture on the main picture.
5
Press ENTER to return to the previous screen.
Activating a picture or swapping the
positions of two pictures
When P&P is selected
1
Press
M
/
m
to move the cursor (yellow) to “Active
Picture” and press ENTER.
The following menu appears on the screen.
PICTURE AND PICTURE(PAP)
PAP:
Active Picture:
Picture Size:
Picture Position
P&P
Exit
MENU
Select Set
ENTER
Left
Right
Swap
2
Select the Active Picture mode with M / m and
press ENTER.
When you make the menu appear, the frame
appears around the picture for which you can
currently adjust the setting.
The audio corresponding to the currently active
picture is output.
Left: Activates the picture on the left.
Right: Activates the picture on the right.
Swap: Swaps the position of the two pictures.
While not showing the menu screen, the picture on
the left will be activated when you press
<
on
the Remote Commander, and the picture on the
right will be activated when you press
,
on the
Remote Commander.
When PinP is selected
1
Select “Active Picture” with M / m and press
ENTER.
The following appears on the screen.
PICTURE AND PICTURE(PAP)
PAP:
Active Picture:
Picture Size:
Picture Position
PinP
Exit
MENU
Select Set
ENTER
Main
Sub
Swap
2
Select the Active Picture mode with
M
/
m
and
press ENTER.
When you make the menu appear while the Sub
picture is activated, the frame appears around the
sub picture. While the Main picture is activated,
the frame does not appear. The audio
corresponding to the currently active picture is
output.
Main: Activates the main picture.
Viewing two pictures at the same time