Sony FWD-32LX1R Mounting Bracket, Operating Instructions Manual

Page: 81 / 316

33
(GB)
Sub: Activates the inset picture.
Swap: Swaps the main and the inset pictures.
While not showing the menu screen, the main
picture will be activated when you press
< on
the Remote Commander, and the inset picture will
be activated when you press
, on the Remote
Commander.
Zooming in on a picture
When P&P is selected
1
Select “Picture Size” with M / m and press ENTER.
2
Keep pressing < / , to change the size of the
picture, then press ENTER.
When PinP is selected
1
Select “Picture Size” with
M
/
m
and press ENTER.
The following appears on the screen.
PICTURE AND PICTURE(PAP)
PAP:
Active Picture:
Picture Size:
Picture Position
PinP
Main
Exit
MENU
Select Set
ENTER
Large
Small
2
Press
M
/
m
to select the size, then press ENTER.
Large: Increases the size of the inset picture.
Small: Decreases the size of the inset picture.
Adjusting the position of the inset
picture (For PinP only)
1
Select “Picture Position” with
M
/
m
and press
ENTER.
PICTURE AND PICTURE(PAP)
PAP:
Active Picture:
Picture Size:
Picture Position
PinP
Main
Small
Exit
MENU
Select Set
ENTER
2
Adjust the position of the inset picture with M / m /
< / , , then press ENTER.
Viewing two pictures at the same time
Notes
• You can show two pictures only when “Multi
Display” is set to “Off.”
• While showing two pictures, the settings of
“Brightness” and “Contrast” adjust the balance
between the two pictures.
• You can select any of the following combinations of
input signals for the PICTURE AND PICTURE
function.
• The input system for the picture on the right or the
inset picture is displayed in the upper right on the
screen. And under this, color system or resolution/
vertical frequency is displayed for the Active Picture.
PC
+
PC
PC
+
Video/
(Digital) (Analog) S Video
Input1 + Input2 Input1 +
BKM
-FW10
Input1 +
BKM
-FW12 Input2 +
BKM
-FW10
Input1 +
BKM
-FW11
Input1 +
BKM
-FW50
PC
+ Component
PC
+
Digital
(Analog) Video
Input1 +
BKM
-FW11 Input2 + Input1
Input1 + Input2
BKM
-FW12 + Input1
Input2 +
BKM
-FW11
BKM
-FW11 + Input1
Input1 +
BKM
-FW12
Input2 +
BKM
-FW12
Video/
+ Component
Com
Component
S video (up to 480i)
BKM
-FW10 + Input2 * Input2 +
BKM
-FW11 *
Input2 +
BKM
-FW12 *
Digital
+ Component
Digital
+
Video/
Video Video S video
Input1 +
BKM
-FW11 Input1 +
BKM
-FW10
Input1 + Input2
Input1 +
BKM
-FW12
Recommended combinations
• While using the combination marked with *, the
Closed Caption and Auto Wide functions work only
while inputting signals from the BKM-FW10, BKM-
FW11 or BKM-FW12.
• 2 motion pictures of different TV systems may not
be displayed properly due to difference in the signal
format.