Sony FWD-32LX1R Mounting Bracket, Operating Instructions Manual

Page: 88 / 316

40
(GB)
3
Select “IP Address Setup” with
M
/
m
and press
ENTER.
The following menu appears on the screen.
INITIAL SETUP/INFORMATION
IP Address Setup
DHCP
Manual
Set ENTER Exit MENU Select
4
Select “DHCP” with
M
/
m
and press ENTER.
The following menu appears on the screen.
INITIAL SETUP/INFORMATION
IP Address Setup
DHCP
Manual
Set
ENTER
Exit
MENU
Select
Cancel
Execute
5
Select “Execute” with
M
/
m
and press ENTER.
An IP address is automatically obtained.
Note
When you obtain an IP address automatically using
DHCP, an IP address may differ every time you turn
the power of the display unit off and on.
Setting an IP address manually
(Manual)
1
Select “Manual” in step 4 of “Obtaining an IP
address automatically (DHCP)” and press
ENTER.
The following menu appears on the screen.
INITIAL SETUP/INFORMATION
Manual
IP Address:
Subnet Mask:
Gateway:
Primay DNS:
Secondary DNS:
Execute
000 . 000 . 000 . 000
000 . 000 . 000 . 000
000 . 000 . 000 . 000
000 . 000 . 000 . 000
000 . 000 . 000 . 000
Set ENTER Exit MENU Select
2
Select an item to be set manually with M / m and
press ENTER.
INITIAL SETUP/INFORMATION
Manual
IP Address:
Subnet Mask:
Gateway:
Primay DNS:
Secondary DNS:
Execute
000 . 000 . 000 . 000
000 . 000 . 000 . 000
000 . 000 . 000 . 000
000 . 000 . 000 . 000
000 . 000 . 000 . 000
Set
ENTER
Exit
MENU
Select
000 . 000 . 000 . 000
3
Set the three digit value (0 to 255) for the first box
with
M / m on the display unit or numeric keys on
the remote commander and press ENTER or
,
.
The cursor moves to the next box.
INITIAL SETUP/INFORMATION
Manual
IP Address:
Subnet Mask:
Gateway:
Primay DNS:
Secondary DNS:
Execute
000 . 000 . 000 . 000
000 . 000 . 000 . 000
000 . 000 . 000 . 000
000 . 000 . 000 . 000
000 . 000 . 000 . 000
Set
ENTER
Exit
MENU
Select
000 . 000 . 000 . 000
4
Set the three digit value (0 to 255) for each of the
four boxes and press ENTER.
The following menu appears on the screen.
INITIAL SETUP/INFORMATION
Manual
IP Address:
Subnet Mask:
Gateway:
Primay DNS:
Secondary DNS:
Execute
123 . 123 . 012 . 034
000 . 000 . 000 . 000
000 . 000 . 000 . 000
000 . 000 . 000 . 000
000 . 000 . 000 . 000
Set
ENTER
Exit
MENU
Select
5
Select the next item to be set manually with M / m
and repeat the same procedure and press ENTER.
6
After values are set for all the desired items, select
“Execute” with
M / m , then press ENTER.
Select “OK” and press ENTER.
An IP address is set manually.
Note
When an IP address is not set properly, the following
error codes will be displayed in accordance with the
error cause.
Error 1 Communication error between the
display unit and an optional adaptor such
as BKM-FW32 or BKM-FW50
Error 2 A specified IP address is already used for
other device.
Error 3 IP address error
Error 4 Gateway address error
Error 5 Primary DNS address error
Error 6 Secondary DNS address error
Error 7 Subnet mask error
Setting an IP address and communication speed