![background image](http://html.mh-extra.com/html/sony/fst-zux999/fst-zux999_operating-instructions-manual_420541061.webp)
FST-ZUX999.GB.4-148-130-11(1)
1
GB
Additional I
nf
or
ma
tion
Additional Information
Troubleshooting
1
Make sure the power cord and
speaker cords are correctly and firmly
connected.
2
Find your problem in the checklist
below, and take the indicated
corrective action.
If the issue persists, contact your
nearest Sony dealer.
If the STANDBY indicator flashes
Immediately unplug the power cord,
and check the following items.
If your system has a voltage selector,
is the voltage selector set to the
correct voltage?
Are you using only the supplied
speakers?
Is anything blocking the ventilation
holes on the back of the system?
After the STANDBY indicator stops
flashing, reconnect the power cord,
and turn on the system. If the issue
persists, contact your nearest Sony
dealer.
General
The display starts flashing as soon
as you plug in the power cord even
though you have not turned on the
system.
Press DISPLAY A or B (or DISPLAY
on the remote) once while the system
is off. The demonstration disappears.
“– –:– –” appears in the display.
A power failure has occurred. Set the
clock (page 22) and timer settings
(page 58) again.
The STANDBY indicator remains lit
after unplugging the power cord.
The STANDBY indicator may not turn
off immediately after unplugging the
power cord. This is not a malfunction.
The indicator will turn off after about
40 seconds.
The system does not turn on.
Is the power cord plugged in?
Is the voltage selector set correctly to
match the local power line voltage?
(For models with a voltage selector
only)
The clock or timer setting is canceled.
The power cord is disconnected or a
power failure occurred. Redo “Setting
the clock” (page 22). If you have set
the timer, redo “Using the timers”
(page 58). Note that the Sleep Timer is
automatically canceled if you turn on
the DJ mode.
Continued