FST-ZUX999.GB.4-148-130-11(1)
GB
Oper
ations
To
Do this
Mix the
sounds from
CHANNEL A
and B
Adjust the CROSS
FADER slider to the
point between left
and right ends. Closer
to the left end, more
CHANNEL A sound is
mixed to the output.
Monitoring a channel through
the headphones (DJ mode
only)
You can monitor the playback of audio
source from either of the channels
through the connected headphones,
maintaining speaker outputs of different
audio sources from the rest of the
channels. This function is suitable to
identify a point for sound mixing using
the cross fader function.
Make sure to turn on the DJ mode before
operations.
1
Connect the headphones (not
supplied) to
jack.
Make sure to turn
LEVEL
counterclockwise to “MIN” before you
connect the headphones.
2
Press
CUE or to select the
CHANNEL A or B.
The button for selected channel lights
up.
3
Turn
LEVEL clockwise or
counterclockwise to adjust the
volume level of the headphones.
Notes
The sound output from the headphones is
same as the original music source.
Make sure to adjust headphones volume
using
LEVEL. In DJ mode, you cannot
adjust headphones volume using the
MASTER VOLUME (or /
on
the remote).
You cannot hear the microphone sound and
the PAD sound (“BEAT BLEND”) through
headphones.
