5-30 (E)
DWT-B30
5. Click
the
[Write]
button.
The update is started.
t
In case that the update has failed, perform “In case that the update has failed” in this section.
When the update is completed, a message indicating that the update has been completed normally is
displayed. Click the
[OK]
button. (The following screen shows the case that the version was updated
to 1.03.)
6. Click
the
[Exit]
button to quit DWT-B30 Version Updater.
7. Turn off the power of this unit and disconnect the USB cable.
8. Attach the lid (USB). (Refer to Section 3-2-3.)
9. Perform the factory preset.
(1) Turn on the power while pressing the
[SET]
button of this unit.
(2)
Press
the
[+]
or
[_]
button, and select FACTORY PRESET in the menu.
(3) Press and hold the
[SET]
button for 2 seconds or more.
(4)
Press
the
[+]
or
[_]
button, and select “Yes”. Then, press the
[SET]
button. (The factory preset
has been completed.)
10. Return each setting to the user setting value noted in “Preparation”. (The update has been completed.)
Summary of Contents for DWT-B30
