Sony DSR-40, Operating Instructions Manual

Page: 51 / 132

Chapter 3 Menu Settings
Chapter 5 Menu Settings
51 GB
Changing Menu Settings
This VCR has various functions available, and you can set and check them
on the monitor screen. Before operation, set the clock by setting the
CLOCK SET menu.
You can change the menu settings on the SET UP MENU screen.
If necessary, change the settings manually.
Changing the SET UP MENU Settings
Follow the instructions below to change the settings.
1
Press MENU.
The SET UP MENU appears on the monitor screen.
2
Press
˘
/
≥
to select the option you want to change, and press SET.
Each menu option appears on the monitor screen (see the table below).
3
Press
˘
/
≥
to change the setting, and press SET.
The menu disappears from the monitor screen.
To cancel the menu settings, press MENU again.
Menu Contents
Initial settings are indicated in bold letters.
Menu options
LOCAL ENABLE
RS-422 CUE-UP MODE
Set this option to
ALL DISABLE
STOP & EJECT
EJECT
WITH VIDEO
WITHOUT VIDEO
Description of settings
• When the REMOTE/LOCAL switch is set to REMOTE, all of the tape
transport control buttons (front panel/remote control unit) are
disabled.
• When the REMOTE/LOCAL switch is set to REMOTE, only the STOP
and EJECT buttons (front panel/remote control unit) are enabled.
• When the REMOTE/LOCAL switch is set to REMOTE, only the
EJECT button (front panel) is enabled.
• While searching with equipment connected to the REMOTE
connector, the searching picture is displayed.
• Does not display the searching picture. (The searching speed will be
faster than when set to WITH VIDEO.)
RS-422 CUE UP MODE
SET UP MENU
LOCAL ENABLE
AUTO OFF
AUTO REWIND
SELECT & SET END MENU
INDEX WRITE
CASSETTE MEMORY SEARCH
CASSETTE MEMORY ERASE
Chapter 5 Men
u Settings