Chapter 3 Using the Unit as a Player in an Editing System
46
GB
Chapter 3
Using the Unit as a Player in an Editing System
This indicator moves as
you adjust the H PHASE
COARSE or H PHASE
FINE menu.
This indicator moves as
you adjust the SC 0/180
or SC PHASE menu.
Adjust the sync and subcarrier phase of the output
signal from player 1.
8
On player 1, adjust the SC control, using the SC 0/180 menu for rough
adjustment and the SC PHASE menu for fine adjustment, so that the
output from player 1 on channel (A) is in correct phase alignment with
the black burst signal on channel (B) (See page 53).
Note
When component signals are used, the subcarrier phase indicator does
not appear.
9
Output the player 2 signal from the switcher, using the PVE-500, and
repeat steps
7
and
8
to adjust the sync and subcarrier phase of the
output from player 2.
Adjust the signals
Adjusting the Sync and Subcarrier Phases
Summary of Contents for DSR-40
Page 67: ...Appendix 67GB Appendix ...
