Sony DSR-40, Operating Instructions Manual

Page: 40 / 132

Chapter 3 Using the Unit as a Player in an Editing System
40 GB
Chapter 3 Using the Unit as a Player in an Editing System
Using this unit as a player with the RM-450/450CE
1
Set the SYNCHRO selector to ON.
2
Set the number 3 of the SYSTEM PRESET right switch to OFF (it is
set to OFF at factory).
Setting this to OFF adjusts the synchronization of the recorder.
3
Execute the LEARN function.
Using this unit as a player 1 with the PVE-500
When using this unit as the player 2, the menu item is indicated in ( ).
1
Set Sync Edit of SEtUP-10 to OFF in the SETUP menu.
2
Set P1 dELAY (P2 dELAY) of SEtUP-13 (SEtUP-14) to LEArn in the
SETUP menu.
3
Set rEC Sync of SEtUP-15 to On in the SETUP menu.
4
Set P1 Sync (P2 Sync) of SEtUP-16 (SEtUP-17) to OFF in the SETUP
menu.
5
Execute the LEARN function.
Using this unit as a player 1 with the FXE-120/120P
• When using this unit as the player 2, the menu item is indicated in ( ).
• When using the FXE-100/100P that has been upgraded with the FXE-
KIT1, the menu item is indicated in [ ].
1
Display the item 104 [301] SYNC GRADE in the SETUP menu, and
set PLAYER1 (PLAYER2) to PREROLL & PLAY.
2
Display the item 301 (302) [401 as player 1, 402 as player 2] DEVICE
TYPE PLAYER1 (DEVICE TYPE PLAYER2) in the SETUP menu,
and set the VCR device constants.
3
Execute the LEARN function.
If the edit timing is out of adjustment, follow “Adjusting the IN point” on
the next page.
Adjusting an Edit Timing