15
EN
Outputting Without Effects (BYPASS/MUTE)
The effector comes with two different bypass modes, Bypass and
Mute. Therefore, you can use the BYPASS button to cut output of
the original sound or to output the original sound without effects
depending on which bypass mode you select.
Once you set the BYPASS mode, just press BYPASS to activate
Bypass or Mute. Press again to cancel the bypass or mute .
Choosing the bypass mode
1
Press SYSTEM.
2
Press FUNCTION A to choose "Set Up."
3
Press FUNCTION C to choose "Bypass."
BYPASS
4
Use the operation dial to select BYPAS or
Mute.
Press EXIT a few times to return to the PLAY screen.
System : Bypass Mode
BYPAS
Mode
select
BYPAS
Mute
when
you want to output the original signal
without adding any effects. Only the
original signal is output (see ”Bypass
and Mute” on page 11).
you want to completely cut the sound
output from the effector (including the
input signal). We especially recommend
using mute when connecting the effector
in a send-return loop with a mixer (as
shown on page 12).
System :
Set
UP
Memry
Pedal
M I D I
Morph
A
B
C
D
E
F
M
System : Setup
Input
Bypass
Gate
DISP
A
B
C
D
E
F
Clock
Dry off
FX
Summary of Contents for DPS-V77
Page 31: ...31EN ...
Page 61: ...31F ...
