Sony DPS-V77, Operating Instructions Manual

Page: 12 / 92

12
EN
• Before connecting this unit to another device, be sure to unplug the AC power cord from the power outlet.
• Turn off the power switch on this unit and all components to be connected, such as keyboards and active speakers
(speakers with built in amplifiers).
• After all the connections, double check that the connections are correct before plugging the AC power cord back into the
power outlet.
• If the connected components output large signals that cause distortion, adjust the INPUT knob on this unit to lower the
input level, or lower the output level of the connected component.
Example 1: Hooking up to an instrument
Basic Hookups
Electric Guitar
Guitar Pre-Amplifier
IN
DPS-V77 OUT
Power Amplifier
Speaker Speaker
MIDI IN
MIDI Foot Controller
(HR-RC5, etc..)
Speaker Speaker
Power Amplifier
DPS-V77
IN
MIDI IN
OUT
Key Board
Example 2: Hooking up to a mixer (cutting the direct sound)
When using the effector in a send-return loop
• We recommend setting the direct output level to – (minus infinity). (See “Cutting the Direct Sound (Dry On/Off)” on page 25.)
• We also recommend setting the BYPASS function to MUTE (as shown on page 15).
S
S
Microphones
IN
OUT DPS-V77
DPS-V77
Monitor Speaker
Power Amplifier
Graphic Eqalizer
DAT Recorders
CD Players
Audio Mixing Console
etc
etc
IN
OUT
Power Amplifier
Main Monitor Speaker System
Effect Send
Effect Return
Effect Send
Effect Return
Hooking Up