22
GB
Digital Photo Printer -DPP-FP30_GB_UC2/CED/CEK/AU_
2-190-186-12(1)
Installing the PictureGear
Studio
Install the PictureGear Studio to your
computer.
1
Turn on your computer and
start Windows.
• When installing or uninstalling
the software in Windows
®
2000
Professional, log on Windows as
the user name of “Administrator”
or “Power user”.
• When installing or uninstalling
the software in Windows
®
XP
Professional/Home Edition, log
on as a user name with the
“Computer administrator” user
account.
Notes
• Be sure to close all running
programs before installing the
software.
• The dialog boxes in this section are
those in Windows XP Professional,
unless otherwise specified. The
installation procedures and the
dialog boxes shown differ
depending on the operation system.
2
Insert the supplied CD-ROM
into the CD-ROM drive of your
computer.
The setup starts automatically and
the installation window is
displayed.
Notes
• In case the installation window is
not automatically displayed, double-
click the “Setup.exe” of the CD-
ROM.
• Depending on the PC system
environments, the Microsoft Data
Access Component 2.7 and Jet 1.0
should be installed during the
PictureGear Studio installation. If
so, the dialog box used for installing
the programs will be displayed
automatically; Follow the on-screen
instructions proceed with the
installation.
3
Click “Installing PictureGear
Studio”.
The “PictureGear Studio Setup”
dialog box appears.
4
Click “Next”.
01GBPFP3006PC-UC/CED.p65
10/22/04, 4:06 PM
22