2-13
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
No.
Page
Item
Setup
Description
36
OPERATION 1
R-G/B-G SEL.
ON/
[OFF]
Turns ON/OFF the function of adding the R-G and B-G signal to
the video signal that is output from the TEST OUT connector.
GAMMA TABLE
[A]
/B/C/D/F
Selects the characteristics of the gamma correction.
A : Gamma of x:y = 1:4
B : Gamma of x:y = 1:5
C : Gamma of x:y = 1:4.5
D : Gamma of x:y = 1:0.7
F : Gamma kine film
LOW LIGHT
ON/
[OFF]
Turns ON/OFF the LOW LIGHT indication function of VF.
LOW LIGHT LEVEL
X(
[0]
)
Sets the starting level of LOW LIGHT indication when the above
described LOW LIGHT function is set to ON.
Note : When menu is being displayed, “L” is indicated instead of
“LOW LIGHT” indication. (example) LOW LIGHT LEVEL : L 0
SELECT BARS
SMPTE/EBU/SNG Sets the type of built-in color bars signal
*
Default value
SMPTE : SMPTE color bars
SMPTE (NTSC)
EBU
: EBU color bars (PAL)/Full color bars (NTSC)
EBU (PAL)
SNG
: SNG color bars
WHITE BCH
ATW/
[AWB]
Sets the function of white balance (B-CH)
ATW
: Auto tracing white balance
AWB
: Auto white balance
BATTERY
10% /20%
Sets the blinking (alarm) starting level of the remaining amount of
WARNING
battery in ANTON BAUER Inc., battery.
10% : Starts blinking when the remaining amount of battery
voltage reaches about 0.67 V.
20% : Starts showing the 20% display when the remaining
amount of battery voltage reaches about 1.33 V, and starts
blinking at about 1.0 V.
WIDE AWB
ON/
[OFF]
Turns ON/OFF the function of widening the adjustment range of
auto white balance.
ZEBRA
ON/
[OFF]
Turns ON/OFF the zebra pattern indication when a VF that is not
equipped with the ZEBRA switch.
TURBO SW INDEP.
ON/
[OFF]
ON
: Turns ON/OFF the TURBO GAIN function using the TURBO
GAIN button, independent from the GAIN switch (L/M/H).
OFF : Set to OFF during normal operation.
Output level
Input level
x (3%)
y
2-1. Service Mode