![background image](http://html.mh-extra.com/html/sony/dhc-ex880md/dhc-ex880md_operating-instructions-manual_420509069.webp)
69
4
Press MENU/NO, then turn MULTI
CONTROLLER until “Name in ?”
appears.
5
Press ENTER/YES.
The cursor starts flashing.
6
Press DISPLAY so that the desired
type of character appears.
Each time you press the button, the
display changes as follows:
A (Upper cases)
n
a (Lower cases)
n
0 (Numbers)
n
! (Symbols)*
n
(Blank space)
n
A
n
...
* You can use the following symbols:
! ” # $ % & ’ ( ) * + , – . / : ; < = > ? @ _ `
7
Turn MULTI CONTROLLER until
the character you want appears.
The selected character flashes.
To enter a blank space, press
n
without
turning MULTI CONTROLLER.
8
Press
n
to enter the character.
The cursor shifts rightward and waits for
the input of the next character.
Labeling the preset
stations
— Station Name
Cursor
Cursor
You can assign a name of up to ten characters
(Station Name) to a preset station. The Station
Name appears when you tune in the station.
1
Press BAND repeatedly until the
band you want appears.
DHC-EX880MD:
FM
n
MW
n
LW*
DHC-MD717:
FM
n
AM
* You cannot assign a name to an LW station.
2
For DHC-EX880MD:
Press TUNING MODE repeatedly
until “PRESET” appears.
For DHC-MD717:
Press PRESET.
3
Turn MULTI CONTROLLER until
the preset number of the station you
want to label appears.
continued
n
N
6
2 4 5,10
8
1
3,4,7
N