![background image](http://html.mh-extra.com/html/sony/dhc-ex880md/dhc-ex880md_operating-instructions-manual_420509092.webp)
92
Display messages (continued)
Message
Cause and countermeasure
MECHA ERROR
NO DISC
Name Full
New
No Name
No Track
—OVER—
Position ok?
Push STOP !
Rehearsal
Smart Space
TOC Reading
TOC Writing
Track End
The transport cartridge is still inserted.
m
Turn off the system and wait for the mechanism to come to a complete stop,
then remove the cartridge.
There is no disc in the MD deck.
m
—
There is no more space to store disc or track titles (you have already input 1,700
characters).
m
Erase unnecessary track titles, then input the title again.
You specified recording on a brand new MD or from the last recorded portion.
m
—
You tried to show the name of an non-labeled disc or track.
m
You can assign disc and track names to a recordable MD (see page 57).
The inserted disc has a disc title but no tracks.
m
—
You have reached the end of the disc while pressing
)
during playback pause.
m
Keep pressing
0
or turn SELECTOR to return to the desired playback
position.
The portion to be divided by the Divide Function is being played back.
m
Listen to the played contents to confirm or change the position to be divided
(see page 64).
You pressed CONTINUE, PROGRAM or SHUFFLE while an MD is playing.
m
You cannot change the play mode during playback. Press
p
to stop play, then
press the desired button.
The portion to be divided by the Divide Function is being played back for
confirmation.
m
Listen to the played contents to confirm the position to be divided (see
page 64).
Silence continued for 3 or more but less than 30 seconds during digital recording,
so the Smart Space function activated to replace the silence with a blank of about
3 seconds.
m
If you do not want to shorten the space between tracks, turn off the Smart Space
feature (see page 54).
The deck is reading the MD Table of Contents (TOC).
m
Wait until “TOC Reading” turns off.
Do not move the deck until “TOC Reading” turns off to ensure proper reading.
The MD Table of Contents (TOC) is being updated.
m
Wait until “TOC Writing” turns off.
Do not move the deck until “TOC Writing” turns off to ensure the complete
recording or editing.
You have reached the end of the disc while adjusting the position to be divided.
m
Change the position (see page 64).