![background image](http://html.mh-extra.com/html/sony/dhc-ex880md/dhc-ex880md_operating-instructions-manual_420509031.webp)
31
2
Press FUNCTION
>
/
.
repeatedly
to switch the function to CD.
Note
You can input disc titles only when the CD
player is in stop mode.
3
Press CONTINUE.
4
Press DISC SKIP (or CD D.SKIP on
the remote) until the number of the
tray containing the desired CD
appears.
Wait for the number of tracks and the
total playing time to appear, then
proceed to the next step.
5
Press MENU/NO.
6
Turn SELECTOR until “Name in?”
appears.
7
Press ENTER/YES.
The cursor starts flashing.
8
Press DISPLAY so that the desired
type of character appears.
Each time you press the button, the
display changes as follows:
A (Upper cases)
n
a (Lower cases)
n
0 (Numbers)
n
! (Symbols)*
n
(Blank space)
n
A ...
* You can use the following symbols:
! ” # $ % & ’ ( ) * + , – . / : ; < = > ? @ _ `
9
Turn SELECTOR until the character
you want appears.
To enter a blank space, press
n
without
turning SELECTOR. You cannot enter a
space as the first character.
10
Press
n
to enter the character.
The cursor shifts rightward and waits for
the input of the next character.
11
Repeat steps 8 to 10 to complete the
entire title.
If you made a mistake, press
N
or
n
until the character you want to change
flashes, then repeat steps 8 to 10.
To erase the character, press MENU/
NO. Each time you press the button, the
character at the position of the cursor is
erased. You cannot insert characters.
12
Press ENTER/YES to complete the
labeling procedure.
The disc title is stored in the system
memory.
To cancel labeling
Press
p
on the CD player during steps 6 to
11.
Cursor
Cursor
continued