Sony DCR-DVD103 Operating Manual Download

Page: 102 / 119

102

DCR-DVD92/DVD103/DVD203/DVD403/DVD602/DVD653/DVD703/DVD803

2-587-622-

(1)



(Battery level warning)

Slow ﬂashing

•

The battery pack is nearly used up.

•

Depending on the operating,

environment, or battery conditions,



may ﬂash, even if there are

approximately 20 minutes remaining.



(Moisture condensation warning)*

Fast ﬂashing

•

Moisture condensation has occurred

with the disc. Turn off your camcorder
and leave it for about 1 hour.

(High temperature warning)

Slow ﬂashing

•

The temperature of your camcorder is

getting higher.

Fast ﬂashing

•

The temperature of your camcorder

is extremely high.

Turn off your

camcorder and leave it for a while in a
cool place.

(Warning indicator pertaining to

the ﬂash)*

Slow ﬂashing

•

Still charging.

Fast ﬂashing

•

There is something wrong with the

ﬂash.

You hear a melody when the warning indicators

appear on the screen (p.68).

Description of warning

messages

If messages appear on the screen, follow
the instructions.



Battery

FOR “info LITHIUM” BATTERY ONLY

(p.107)

Battery level is low

(p.17, 107)

Old Battery Use a new one

(p.107)



Drive



Drive error Turn on power again

•

A problem may have occurred with the

disc drive. Turn off and then on again.



Moisture condensation



Moisture condensation Turn off

for 1H



Cannot open Try later



Disc

Recording disabled

Cannot open Try later



Recording disabled

•

A malﬁnction has occurred with the

disc and it cannot be used.

Warning indicators and messages (continued)

Summary of Contents for DCR-DVD103
























































































































Search results

Summary of Contents for DCR-DVD103

Reviews:

Related manuals for DCR-DVD103

Brands by name

Popular brands

Sony DCR-DVD103, Operating Manual

Search results

Summary of Contents for DCR-DVD103

Reviews:

Related manuals for DCR-DVD103

Brands by name

Popular brands