Sony DCR-DVD103 Operating Manual Download

Page: 66 / 119

DCR-DVD92/DVD103/DVD203/DVD403/DVD602/DVD653/DVD703/DVD803

2-587-622-

(1)

For DCR-DVD92/DVD602



WIDE STEREO

Records 2 channel sound with more
presence.

STEREO

Records normal stereo sound.

•

The setting returns to [WIDE STEREO] when

you have the power source disconnected for
more than 5 minutes.

Except for DCR-DVD92/DVD602



4CH MIC

Records 4 channel sound, front L/R
and rear L/R, converting them to 5.1ch
surround sound.

STEREO

Records normal stereo sound.

•

The setting returns to [4CH MIC] when you

have the power source disconnected from your
camcorder for more than 5 minutes.

LCD/VF SET

The recorded picture will not be affected
even when you change the setting.



LCD BRIGHT

You can adjust the brightness of the LCD
screen.



Adjust the brightness with



Touch



LCD BL LEVEL

You can adjust the brightness of the LCD
screen’s backlight.



NORMAL

Standard brightness.

BRIGHT

Brightens the LCD screen.

•

When you use an AC Adaptor as the power

source, [BRIGHT] is automatically selected for
the setting.

•

When you select [BRIGHT], battery life is

slightly reduced during recording.



STEREO

Plays back with main and sub sound (or
stereo sound).

Plays back with main sound or the left
channel sound.

Plays back with sub sound or the right
channel sound.

•

The setting returns to [STEREO] when you

have the power source disconnected from your
camcorder for more than 5 minutes.

MICREF LEVEL

You can select the microphone level for
recording sound.
Select [LOW] when you want to record
exciting and powerful sound in a concert
hall, etc.



NORMAL

Records various surround sounds,
converting them into the same level.

LOW

Records surround sound faithfully.
This setting is not suitable for recording
conversations.

•

The setting returns to [NORMAL] when you

have the power source disconnected from your
camcorder for more than 5 minutes.

SUR MONITOR (Except for DCR-

DVD92/DVD602)

You can display the direction from which
the recording sound comes when recording
in 5.1ch mode.

EXT SUR MIC

You can customize the sound setting when
using an external microphone (optional).
You attach an external microphone
(optional) to the Active Interface Shoe (p.
81). Refer to the instruction manuals of the
microphone for details.

STANDARD SET (continued)

Summary of Contents for DCR-DVD103
























































































































Search results

Summary of Contents for DCR-DVD103

Reviews:

Related manuals for DCR-DVD103

Brands by name

Popular brands

Sony DCR-DVD103, Operating Manual

Search results

Summary of Contents for DCR-DVD103

Reviews:

Related manuals for DCR-DVD103

Brands by name

Popular brands