47
DCR-DVD92/DVD103/DVD203/DVD403/DVD602/DVD653/DVD703/DVD803
2-587-622-
11
(1)
5
When you have finished entering
characters, touch
.
The disc title changes to the one you
entered.
6
Touch [END].
• When you change a disc title already set
by other devices, the 21st and subsequent
characters are deleted.
Step 5: Finalizing a disc
1
Confirm the settings you made in
steps from 2 to 4 of the “steps for
finalizing” on the LCD screen.
2
Touch
.
3
Touch [YES]
[YES].
Finalizing starts.
• Do not apply shock or vibration to your
camcorder, and do not disconnect the AC
adaptor during finalizing.
When you need to disconnect the AC
adaptor, make sure that the power of your
camcorder is set to off and disconnect the
adaptor after the CHG (charge) lamp goes
off. Finalizing restarts when you connect
the AC adaptor and turn on your camcorder
again.
You cannot remove the disc until the
finalizing operation is completed.
4
Touch
,when [Completed]
appears.
When using a DVD-R/DVD-RW
(VIDEO mode)/DVD+RW,
flashes after finalizing is completed
when the POWER switch is set to
(Movie) or
(Still). Remove the disc
from your camcorder.
• When you made the setting to enable a creation
of a DVD menu on DVD-R/DVD-RW (VIDEO
mode)/DVD+RW, then finalize the disc, the
DVD menu appears for a few seconds while
finalizing the disc.
• You cannot view a Photomovie with the DVD-
R/DVD-RW (VIDEO mode) discs on your
camcorder.
• After finalizing a disc, the disc indicator and the
recording format are displayed as shown below:
DVD-R
DVD-RW (VIDEO mode)
DVD-RW (VR mode)
DVD+RW
Playback on DVD devices
