Sony DAV-L8100 - Micro Satellite System Operating Instructions Manual Download Page 54

Page: 54 / 59

Additional Information

Remote Button

Operations

Function

TEST TONE

Receiver

Press to output test tone.

EQ/TONE

Receiver

EQ ON/OFF.

MULTI /2CH

Receiver

Selects MULTI CH IN

A. DIRECT

source.

MUTING

Receiver

Mutes the sound from
the receiver.

AV DISPLAY

TV/VCR/

Selects information

LD player/

displayed on the TV

DVD player/

screen.

VCD player

TITLE/GUIDE

DVD player

Displays DVD title.

VCR/SAT

AV MENU

DVD player

Displays DVD menu.

VCR/SAT

MAIN MENU

Receiver

Press this button
repeatedly to select one
of the three cursor
modes: LEVEL,
SURROUND or EQ.

DVD player

Selects a menu item.

VCR/SAT

Receiver

Selects a menu item.

Receiver

Makes adjustment or
change the setting.

ENTER /

DVD player/

Enters the selection.

EXEC

VCR/SAT

EXIT/RETURN

DVD player

Returns to the previous

VCR/SAT

menu or exits the menu.

MASTER VOL

Receiver

Adjusts the master

+/–

volume of the receiver.

* Only for Sony TVs with the picture-in-picture function.

Notes

• Some functions explained in this section may not work

depending on the model of the receiver.

• The above explanation is intended to serve as an example only.

Therefore, depending on the component the above operation
may not be possible or may operate differently than described.

• The VIDEO 3, PHONO, AV1, AV2, 3RD, NIGHT MODE, ON

SCREEN, 2ND ROOM and AUDIO SPLIT functions are not
available for set operation.

Remote Button

Operations

Function

D. SKIP/CH/

Receiver

Scans and selects preset

/–

stations.

TV/VCR/SAT

Selects preset channels.

CD player

Skips discs (CD player
with multi-disc changer
only).

MONITOR

Press to activate TV
control buttons. Press
again to restore original
category.

TV/VIDEO

TV/VCR

Selects input signal: TV
input or video input.

SEARCH MODE

DVD player

Selects searching mode.

CLEAR

DVD player

Press if you made a
mistake when you press
the number button.

VCD player

Press to go back to the

(with

)

previous menu.

WIDE

Selects the wide picture
mode.

-/--

TV/VCR

Selects the channel
entry mode, either
one or two digit.

ANT TV/VTR

VCR

Selects output signal
from the aerial terminal:
TV signal or VCR
program.

JUMP

Toggles between the
previous and the current
channels.

SUB CH +/–*

Selects preset channels
for the small picture.

VOL +/–

Adjust the volume of TV.

POSITION*

Changes the position of
the small picture.

MUTING

Mutes the sound from

(with PAUSE)

TV.

SWAP*

Swaps the small and the
large picture.

P IN P*

Activates the picture-in-
picture function.

INPUT MODE

Receiver

Selects input mode for
your digital components.

A. F. D.

Receiver

Auto Format Decoding.

MODE +/–

Receiver

Selects sound field mode.

2CH

Receiver

Selects 2CH mode.

PRESET

Receiver

Selects CINEMA
STUDIO EX A, B or C.

Remote Button Description

Summary of Contents for DAV-L8100 - Micro Satellite System




























































Search results

Summary of Contents for DAV-L8100 - Micro Satellite System

Reviews:

Related manuals for DAV-L8100 - Micro Satellite System

Brands by name

Popular brands

Sony DAV-L8100 - Micro Satellite System, Operating Instructions Manual

Search results

Summary of Contents for DAV-L8100 - Micro Satellite System

Reviews:

Related manuals for DAV-L8100 - Micro Satellite System

Brands by name

Popular brands