Sony DAV-L8100 - Micro Satellite System Operating Instructions Manual Download Page 51

Page: 51 / 59

Additional Information

Remote Button

Operations

Function

TEST TONE

Receiver

Press to output test tone.

MAIN MENU

Receiver

Press this button
repeatedly to select one
of the two cursor
modes: LEVEL and
SURROUND.

MASTER VOL

Receiver

Adjusts the master

+/–

volume of the receiver.

MENU </>

Receiver

Selects a menu item.

MENU +/–

Receiver

Makes adjustment or
change the setting.

DVD player

Displays DVD menu.

DVD player

Selects a menu item.

ENTER

DVD player

Enters the selection.

RETURN

DVD player

Returns to the previous
menu or exits the menu.

TITLE

DVD player

Displays DVD title.

** Only for Sony TVs with the picture-in-picture function.

Notes

• Some functions explained in this section may not work

depending on the model of the receiver.

• The above explanation is intended to serve as an example only.

Therefore, depending on the component the above operation
may not be possible or may operate differently than described.

• The VIDEO 1, VIDEO 2, VIDEO 3 and PHONO functions are

not available for set operation.

Remote Button

Operations

Function

CD player/

Pauses play or record.

MD deck/Tape

(Also starts recording

deck/VCR/

with components in

DVD player/

record standby.)

VCD player/
LD player/
DAT deck

CD player/

Stops play.

MD deck/Tape
deck/VCR/
DVD player/
VCD player/
LD player/
DAT deck

POSITION**

Changes the position of
the small picture.

SWAP**

Swaps the small and the
large picture.

DISC

CD player

Select discs (Mega
storage CD player only).

SUB CH +/–**

Selects preset channels
for the small picture.

D. SKIP/CH/

Receiver

Scans and selects preset

/–

stations.

TV/VCR/SAT

Selects preset channels.

CD player

Skips discs (CD player
with multi-disc changer
only).

DISPLAY

TV/VCR/

Selects information

LD player/

displayed on the TV

DVD player/

screen.

VCD player

P IN P**

Activates the picture-in-
picture function.

JUMP

Toggles between the
previous and the current
channels.

WIDE

Selects the wide picture
mode.

ANT TV/VTR

VCR

Selects output signal
from the aerial terminal:
TV signal or VCR
program.

TV/VIDEO

TV/VCR

Selects input signal: TV
input or video input.

A. F. D.

Receiver

Auto Format Decoding.

2CH/OFF

Receiver

Turns off sound field or
selects 2CH mode.

MODE +/–

Receiver

Selects sound field mode.

MULTI CH/

Receiver

Selects MULTI CH IN

2 CH DIRECT

source.

MUTING

Receiver

Mutes the sound from
the receiver.

Summary of Contents for DAV-L8100 - Micro Satellite System




























































Search results

Summary of Contents for DAV-L8100 - Micro Satellite System

Reviews:

Related manuals for DAV-L8100 - Micro Satellite System

Brands by name

Popular brands

Sony DAV-L8100 - Micro Satellite System, Operating Instructions Manual

Search results

Summary of Contents for DAV-L8100 - Micro Satellite System

Reviews:

Related manuals for DAV-L8100 - Micro Satellite System

Brands by name

Popular brands